Generic placeholder image

MetPak Base Station

The MetPak Base Station is capable of monitoring barometric pressure, air temperature, humidity and dew point. The unit features an on-board high accuracy barometric pressure sensor and a Rotronic Hygroclip HC2-S3 temperature/humidity probe housed in a naturally aspirated radiation shield.

Get a Quote
Generic placeholder image

MetPak with Integrated WindSonic

This all-in-one variant of the MetPak features the same on-board sensors as the Base Station, with an integrated WindSonic ultrasonic wind sensor for high accuracy wind speed and direction measurement.

Get a Quote
Generic placeholder image

MetPak Remote Wind Sensor Options

For users who require a remotely mounted wind sensor or who have more specialist wind sensing requirements, MetPak can also be specified with one of Gill's range of 2-axis or 3-axis ultrasonic wind sensors.

The selected sensor is mounted remotely, up to 10m away from the Base Station typically on a mast or tower.

Get a Quote

Key Benefits

  • Wind Speed & Direction
  • Barometric Pressure
  • Temperature
  • Dew Point
  • Humidity
  • Rugged, Professional Design

These specifications are for the unconfigured MetPak only.

Wind Measurement
Wind speed & direction or U & V (Vectors)
Units of measure
m/s, knots, mph, kph, ft/min
Wind Speed Range
0-60m/s (134 mph)
Wind Speed Accuracy
±2% @12m/s
Wind Speed Resolution
0.01m/s (0.02 mph)
Wind Direction Range
0 to 359º - No dead band
Wind Direction Accuracy
±3º @12m/s
Wind Direction Resolution
Air Temperature
Air Temperature
Pt100 1/3 Class B
-50ºC to +100ºC
0.1ºC (0.1ºF)
Units of measure
ºC or ºF
Relative Humidity
0-100% RH
±0.8% @23ºC
0.1% RH
Units of measure
% RH
Compensated for temperature dependency
Barometric Pressure
Units of measure
hPa, mbar, mmHg, inHg
Compensated for temperature dependency -30ºC to +70ºC
Dew Point
0.1ºC (0.1ºF)
Units of measure
ºC or ºF
±0.15ºC (23ºC ambient temp @20ºC dew point)
Power Supply
Input voltage
5V to 30V
<16mA (Output 1 second) @12V
Input Voltage
12V nominal (9.6-16V)
<6.5mA Low power operation
Digital outputs
RS232, RS422, RS485*, SDI-12 or MODBUS (user selectable)
Baud rates
4800-57600 (ASCII) or 1200 (SDI-12)
ASCII, SDI-12 V1.3 or NMEA 0183
Data output
1s, 2s, 4s or polled mode
*2 wire point to point
Protection class
EN 61326
Operating temperature
-35ºC to +70ºC
Storage temperature
-40ºC to +80ºC
Operating humidity
0% to 100% humidity
External construction
UV stabilised white thermoplastic
Anodised Aluminium bracket to allow fitting to 30mm to 58mm mast dimensions
2.1kg (including bracket)
Free software for the display of data and logging
Free software for the configuration of the MetPak, MetPak RG & MetPak Pro
Optional Accessories
15m Power & Data cable
Heater Interface Box
Specifications may be subject to change without prior notice.

Weather Station Software

The MetPak weather station is provided with MetSet configuration software and MetView display software:

Generic placeholder image

MetView Display Software

MetView is supplied free of charge with the MetPak, offering a clear, intuitive display of the current weather conditions.

Download MetSet Display Software

MetView features five gauges: Temperature, Humidity, Pressure, Wind Speed and Wind direction. There is also a digital readout of Dew Point.

Generic placeholder image

MetSet Configuration Software

MetSet is a free software package that allows the user to configure the output and display data provided by the MetPak.

Download MetView Display Software

The simple interface features a range of drop-down selection boxes, providing the ability to enable or disable existing sensors and adjust output rates.

  • Golf Club Weather Monitoring & Club Safety
  • HVAC & Building Automation Control
  • Agricultural Weather Station
  • Government & Emergency Management
  • Education & Environmental Research
  • Pollution Control
  • Weather Forcasting
  • Power and Smart Grid Solutions
  • Sports & Recreation Environmental Observation
  • Transport & Aviation Weather Monitoring

MetPak Product Numbers Explained

Product options may be model specific. Consult the Meacon sales team for availability.