Algodue Electronic Current Analyzers
MFC150
New
- New version completely redesigned
- Delivered already calibrated
- Very thin coil diameter: down to 8 mm
- Newly designed and enhanced bayonet connector including possibility to regulate calibration
- Improved accuracy
- Measurement uniformity at any position of the conductor inside the coil
- Excellent degree of rejection to the external current conductor
- Different coil colours available based on quantity
Highlights
- Suitable to measure currents from mA to hundreds of kA
- High linearity
- Wide dynamic range
- Very useful with large size or awkward shaped conductors or in places with limited access
- No danger from open-circuited secondary
- Not damaged by large overloads
- Non-intrusive, no power drawn from the main
- Thanks to its light weight, it can be changed on the measured conductor
- Totally shielded
- File UL n. E231725-A1-UL
Applications
- Measuring devices, lab instrumentation
- Power monitoring & control systems
- DC ripple measurement
- Harmonics and transients monitoring
- Very high current monitoring
Specifications
Transducer
- Coil length: from 25 to 300 cm
- Coil diameter: 8.3 ±0.2 mm
- Fastening: bayonet holder
- Weight: from 150 to 500 g
- Material: thermoplastic UL94-V0
Electrical characteristics
- Output level (RMS): 100 mV / 1 kA @50Hz (standard)
- Coil resistance: from 70 to 900 Ω
- Positioning error: better than ±1% of reading (with 15 mm diameter cable)
- Frequency range: approx 40 Hz to 20 kHz
- Working voltage: 1000 VRMS CAT III 600 VRMS CAT IV pollution degree 2
- Test voltage: 7400 VRMS / 1 min
Connection cable
- Type: 2 x 0.15 mm + shield
- Length: on request
- Features: cULus approved 80 °C 1000V
Environmental conditions
- Operating temperature: from -30 °C to +80 °C
- Storage temperature: from -40 °C to +80 °C
- Protection degree: IP67
Standards compliace
- Safety: EN61010-1, EN61010-031, EN61010-2-031, EN61010-2-032
EN61010-2-031, EN61010-2-032
©1993-2021 - Measurement & Control Solutions CC - All rights reserved