WindObserver II Wind Speed Sensor
The WindObserver II wind speed sensor is an ultrasonic 2-axis anemometer for the measurement of wind speed and direction. With no moving parts this wind speed sensor is ideal for use in extreme environments.
The WindObserver II utilises the same high-performance measurement technology as the Gill WindSonic wind speed sensor, with some additional features to extend the application potential of the sensor. The WindObserver II wind speed sensor has a high 0-65m/s wind speed measurement range, optional high temperature de-icing system (which extends the operational temperature range to –55ºC), sonic temperature output and averaging.
This wind speed sensor features an IP66 rated stainless-steel housing, which is particularly suitable for use in salt-water environments. The WindObserver II wind speed sensor is proven in airport, offshore, marine and naval applications and carries Lloyd’s register type approval.
Key Benefits
- Precision Ultrasonic Anemometer
- Optional De-Icing System
- 0-65m/s Wind Speed
- Stainless Steel construction
- 0-359° Wind Direction
- Lloyds Register Type Approved
- Free data logging software
- Averaging/gusts to WMO guidelines
Starting Threshold
0.01m/s
Ultrasonic output rate
1Hz, 2Hz, 4Hz, 5Hz, 8Hz or 10Hz
Parameters
UV, Polar, NMEA, Tunnel
Units
m/s, knots, mph, kph, ft/min
Average (Selectable)
Rolling average - 1, 2, 10 min, Gust - 3s
Communication
RS422 / RS485 full duplex / half duplex
Baud Rates
1200, 2400, 4800, 9600, 19200, 38400
Formats
8 bit data; odd, even or no parity
Anemometer Status
Supplied as part of standard message
Anemometer only
9-30VDC (40mA @12VDC)
Heating (optional)
3A @24V AC or DC
Quantity
3 (Speed, direction, status or sonic temp)
Scale
Multiples of ±10m/s up to ±70m/s
Type
±2.5V, 0-5V or 4-20mA
V output resistance
60 Ohms
4-20mA loading
10-300 Ohms
External Construction
Stainless Steel 316
Protection Class
IP66 (NEMA4X)
Operating Temperature
-55ºC to +70ºC (Heated option)
EMC
EN60945:2002, EN61326-1:2013
Icing
MILSTD810F Method 521.2 Procedure I
Standards
Traceable to NAMAS standards
Lloyds Register type approval
Site Calibration
None required. Integrity check unit (Zero wind) supplied as optional extra
WindView Software
Display/logging software
WindCom Software
Configuration, display and logging software
WindObserver II Part Numbers & Options
RS422 Output, 2m Cable
1390-PK-006
RS422 Output, 10m Cable
1390-PK-006/10M
Analogue Output, 2m Cable
1390-PK-026
Analogue Output, 10m Cable
1390-PK-026/10M
RS422 Output, 2m Cable
1390-PK-007
RS422 Output, 10m Cable
1390-PK-007/10M
Analogue Output, 2m Cable
1390-PK-027
Analogue Output, 10m Cable
1390-PK-027/10M
RS422 Output, Pipe Mount, 4m Cable
1390-PK-042
Integrity Check Chamber
1277-00-052