The SpaceLogger T10, or the TextLogger, is a universal serial data recorder, supporting a range of ASCII text logging applications from RS232 compatible data sources.
A TextLogger will capture data from any piece of equipment fitted with a serial port, making it an extremely versatile data logger, ideal for paperless recording of data.
The data is stored on a removable memory card as a .TXT file, enabling remote data logging without the need for PC hook-up. The recorded data file can be simply uploaded to a PC after logging to view and analyse the data; no special software is required.
The unit uses an SD card (included). These cards are available with up to 2 GByte capacity for long term data logging. TextLogger will also accept other compatible data storage cards.
Set up of the SpaceLogger T10 to change the communication protocol, file name format, character substitutions, logic inversion, recording of data as ASCII hex values or data output, is simple via a configuration file written to the SD card. Settings are saved to memory.
The SpaceLogger T10 may be set up to output RS232 data as it is input or as logged. This enables connection to a PC, display or other device.
The SpaceLogger T10 TextLogger has been designed as an economic, stand-alone solution for record keeping of equipment operating data or for instrument test data acquisition.
A TextLogger is the ideal replacement for a printer whenever ASCII data is transmitted from a device, a cost effective paperless data recorder.
Example of SpaceLogger T10 application
Sample and time-stamp data from devices with RS232 output
Width: 67 mm
Depth: 67 mm
Height: 28 mm (excluding optional rubber feet)
|Enclosure material||GP ABS (UL94-HB) plastic and acrylic|
|Power Supply||Supply voltage||7 - 30 V dc|
|Supply current (at 12V dc)||10 mA typical|
|Supply input protection||Polarity reversal protected and internal resettable 140 mA fuse|
|Connection options (both included)||1.3 mm centre pin DC connector, or Screwless terminals (0.32 to 0.64 mm diameter conductors)|
RS232 and TTL/CMOS* logic compatible.
*VIL Input threshold low: 0.6V min 1.2V Typ.
VIH Input threshold high: 1.5V Typ, 2.4V max
8 bits and no parity
Input data may be 8 bits and none, even or odd parity or 7 bits and even or odd parity. Output data format always as default.
Logic inversion on received data is selectable.
|Transmission speed||9600 Baud (default) or selectable to 115200, 57600, 38400, 19200, 4800, 2400 or 1200 Baud|
|Wire acceptance||0.32 to 0.65 mm diameter (AWG 28 to 22)|
|Data Storage||Data storage card||Removable SD, MMC or MMC mobile|
|Data capacity||2 GByte (max)|
FAT16 or FAT32 with 8.3 file names
Sector size 512 Bytes
|Audio/Visual Indicators||LED indicators||
Ready to record data (green LED)
Writing data to SD card (red LED)
Two tone signal on correct card insertion
Continuous tone when buffer full
Single tone when data purge button depressed
Operating: -25°C to +70°C
Storage: -40°C to +70°C
EMC Directive 89/336/EEC - CE marked
(Emissions: EN61326:1997 inc A1/A2/A3:2003, EN60945:1997
FCC/CFR 47: Part 15:2004
The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.
|SpaceLogger S10 - Data Sheet|
|SpaceLogger S10 - User Manual|
|SpaceLogger T10 - Sales Flyer (Weighing) GB|
|SpaceLogger T10 - Sales Flyer (Decontamination) GB|
|SpaceLogger T10 - Sales Flyer (Decontamination) DE|
|SpaceLogger T10 - Sales Flyer (Decontamination) ES|
|SpaceLogger T10 - Sales Flyer (Decontamination) IT|