PK3564



PK3564 complete Power Quality Analysis Systemincludes PS3500 Power Analyzer, four eFX6000 flexible current probes, and our CAS3 hard-shell carrying case.

The PK3564 is the ideal package for comprehensive power studies, energy audits, load studies, and more. Wide-range flexible current probes allow you to get into tight and confined spaces, wrap around large conductors, and measure almost any AC circuit that comes your way.

Advanced PowerSight Manager software improves your efficiency and eliminates sources of error at each stage of the monitoring process. CAT IV safety rating and wireless remote control via Bluetooth for even greater safety. SD memory card for redundant storage and essentially unlimited logging capacity.

For Power Quality studies choose the PS4500 Power Quality Analyzer



PK3564 complete Power Analysis System includes PS3500 Power Analyzer, four eFX6000 flexible current probes, and our CAS3 hard-shell carrying case. The PK3564 is the ideal package for comprehensive power studies, energy audits, load studies, and more.


Measure and log all common power measurement types:  V, A, W, VA, VAR, kWH, PF, Hz, THD, etc.

Wide range of operating modes:

  • frequency modes for 50Hz, 60Hz, 400Hz, variable frequency systems, and DC to cover all your needs.
  • power modes for Positive Power Only (to get the correct answers even if a current probe is backwards), Negative Power Allowed (for regenerative circuits), 2 Current Power (for special distribution and metering systems), quad-power (for multiple parallel single-phase loads)
  • Programmed start and/or stop for precise monitoring sessions, Stop When Full, Never Stop

Able to evaluate all power systems: 3 phase Wye, 3 phase Delta (including 4-wire, open, and grounded), split-phase, single phase, quad single phase (using same source) , 3PT/3CT, 3PT/2CT, 2 current power, DC, quad DC (using same source).

The included Advanced PowerSight Manager software (PSM-A) improves your efficiency and eliminates sources of error at each stage of the monitoring process:

  • TestPlan Manager to organize and automate your tests and the data retrieval
  • SureStart expert system to advise if the connections or settings seem correct or not, prior to starting
  • Setup Wizard to set your logging parameters according to your application
  • ReportWriter to automatically generate error-free reports.

Benefit from the safety rating of 1000V CAT IIII, 600V CAT IV and Bluetooth Wireless Communications (remote viewing/control of the display without the burden of wearing PPE).

SD Memory for redundant storage and essentially unlimited logging capacity.

Extend the measurement range with the use of our industry-widest array of accessories and options:

  • measure down to 0.002 amps AC (HA-GFD)
  • measure from 5 to 2000 amps DC (DC600/DC2000)
  • direct connect and measure to 15kV (5KVP/15KVP)

First rate technical support, direct from the manufacturer to you!



General Specs

Category Notes
Size: PS4500 Analyzer: 3.88" (9.86 cm) W x 7.72" (19.61 cm) L x 1.58" (4.01 cm) Deep at bottom end
2.14" (5.44 cm) Deep at top end
Weight PS4500 Analyzer: 1.1 lbs (0.5 kg)
Operating Range 32 - 122 degrees F (0 - 50 degrees C) Relative humidity to 70% (non-condensing)
Power Requirement 12V DC @ 500 mA.
Battery Life 8-10 hours after 4 hour charge
Battery Type Li-ion
Sampling Rate 16 microseconds for Voltage and Current
Safety 600V CAT IV, 1000V CAT III
SD Card Slot Accepts SD Cards to 32GB (SDHC)
Logging Period (Resolution) 1 Second - 99 Minutes (set by user)
Logging Duration (Length of session) Up to 2 years, depending on memory allocation
Internal Data Retention 8 years
Other Features Crest Factor, K Factor, Peak Demand Period, Peak Demand of Peak, Demand Period,
Duty Cycle, On/Off Cycle %, Avg. On Time, Avg Off Time


Voltage Measurement

Category Notes
Measurement Range 1 to 1000 volts (using included voltage probes), to 15,000 volts (with optional 15KVP voltage probes), to 6 megavolts (with input ratios)
Display Resolution 0.1V (below 400V), 1V (400V to 3999V), 10V (4000V to 39.99KV)
Accuracy 0.5% of reading ±0.3 Vrms


Current Measurement

Category Notes
Measurement Range 2 milliamp (with optional HA-GFD), to 6,000 amps (using included eFX6000 current probes), to 6 megamps (with input ratios)
Display Resolution 0.1 amps (below 400A), 1.0 amp (400 amps and above)
Accuracy ±0.5 % of reading, plus accuracy of probes