Key Features
  • Universal – compatible with majority of the commercially available sensors
  • Programmable – customised software deployment for changing and challenging requirements
  • High input Impedance – ensure accurate sensor readings
  • Programmable analogue output – for connection to SCADA or control application
  • Lowest cost of dataTaker logger range
  • Low power consumption
  • Maintain most features of full-featured DT80 logger with lower channel counts
  • Suitable for environmental application with SDI-12 support
  • Integrated cellular modem for remote monitoring application with a fraction of DT80M cost
  • No hassles in integrating additional equipment and cables
DT82E Enviromental Logger

Versatile Measurement

Connect an array of sensors through the versatile analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm and control tasks to suit your own requirements while interfaces for smart sensors, GPS and other intelligent devices expand the DT82EM flexibility.

  • Weather Station
  • Air pollution
  • Water flow
  • Water pollution
  • Plantation monitoring
  • Green houses
  • Noise level
  • Temperature monitoring

Designed For Remote Applications

The dataTaker DT82EM intelligent data logger is a fully featured low-powered logging platform with an integrated cellular modem, making it perfect for remote applications. The rugged design and wide operating temperature range of the DT82EM provides reliable operation in virtually any environment.

The DT82EM’s perfect balance of performance with low-power also allows you to use a smaller solar panel without compromising on functionality.

Automatic Data Delivery

Forget travelling long distances to get your data. Utilise the DT82EM’s automatic data delivery features to schedule your data to be automatically emailed to your inbox every day, week, month or other time interval.

More sophisticated systems can make use of the automatic data delivery features to send logged data to an FTP server. Alarm conditions can also trigger data delivery in addition to sending alarm messages to multiple email addresses or mobile phones.

Easy to Configure

The DT82EM is confi gured directly in your web browser using dataTaker’s dEX graphical interface. dEX takes you through the confi guration of your logger, showing you wiring diagrams and allowing you to decide – in as much or as little detail – how you want the system to work, suiting both novice or advanced users.

Using the internal modem you can even re-configure your system remotely over the internet if required.

Download Brochure

Max Sampling rate (Hz) 40
Analog Inputs 6 (2-wire common reference)
4 (2-wire isolated)
2 (3 and 4-wire isolated)
Analog Input Range Voltage: ±30m,300m,3000m,50000mVDC
Current: ±30mA
Resistance: 1MΩ
Frequency: 450kHz
Analog Voltage Accuracy ±0.15 of Reading + (Full Scale Reading * 0.01%)
Effective Resolution 18 bits
Analog Outputs 1
Analog Out Range Voltage: 10m-10000mVDC
Current: 0-24mA
Excitation Analog Channel: selectable 2µA, 250µA or 2.5mA precision current source, 4.5V voltage source or switched external supply
Switchable 12V/5 regulated power output (max 300mA)
Digital IO 4 bi-directional channels
Counter Low speed counters: 4 counters shared with digital inputs
Dedicated counters: 4 high speed
RS232/RS422/RS485 serial sensor port No
RS232 host port No
Ethernet Port 1
Data Storage 128MB (upgradeable to 2GB)
Protocols Supported Modbus, FTP, HTTP, XML, SMTP, NTP and SDI-12
CEM20 Expansion Module supported No
Power Requirements 10-30 VDC
Integrated Cellular Modem Interfaces: EDGE, GPRS, GSM, WCDMA, HSUPA, HSDPA
EDGE/GPRS/GSM Freq: 850/900/1800/1900 MHz
WCDMA/HSUPA/HSDPA Freq: 850/1900/2100 MHz
Real Time Clock Accuracy ± 1 min/year (0°C to 40°C)
± 4 min/year (–40°C to 70°C)
Integrated WIFI No
Dimensions(mm) 180x137x65
Weight 1.5kg
Temperature Range –45°C to 70°C
Warranty 3 years

Malaysia bridge strain monitoring

Malaysia-Singapore Second Link

Strainstall Malaysia a specialist in structral monitoring solutions designed and installed a long term monitoring system on the bridge joining Malaysia and Singapore. The bridge is a crucial link between the two countries critical to transporting up to 200,000 vehicles a day. Our client’s system was based around the dataTaker DT85GM with 6 logging stations located throughout the bridge…

Read More

Blast Furnace Monitoring

Strainstall Malaysia a specialist in structral monitoring solutions designed and installed a long term monitoring system to measure the imposed stresses on the reinforcing belly band of a nickel blast furnace in New Caledonia…

Read More