The Standard Series consists of a family of cable extension linear position and linear velocity transducers in a NEMA 1 (IP-40) housing. The transducer mechanism is housed inside of an aluminum cover and attached to an anodized aluminum baseplate with four mounting holes. The measurement range determines which of three housing sizes is to be used. All of the possible UniMeasure analog and digital position outputs are offered in the Standard Series. The wire rope exit is perpendicular to the baseplate as shown in the photo but optional side and bottom wire rope exit locations are available. Other options include nylon jacketed wire rope, dust wiper, terminal strip, non-standard potentiometer, and alternate connector location.
Ratiometric output voltage from a precision potentiometer configured in a voltage divider circuit. Requires regulated input voltage up to 30 V maximum.
PA Specifications PDFPrecision potentiometer in bridge circuit with integral zero and span controls which facilitate interfacing to a bridge amplifier. Requires regulated input voltage up to 30 V maximum.
PB Specifications PDFLoop powered 4 to 20 mA current transmitter with adjustable zero and span controls. Input voltage is 9V to 35V depending upon total loop impedance.
P420 Specifications PDFP510 Provides a 0 to 10 VDC or 0 to 5 VDC voltage output and -10 VDC to +10 VDC or -5 VDC to +5 VDC voltage output. Includes adjustable zero and span controls. Requires input voltage of 4.9 to 30 VDC (unregulated acceptable).
P510 Specifications PDFDigital, TTL level, two channel square wave output signal. 5 VDC input voltage. Optional configurations include 8 to 28 VDC, current sinking, push-pull & line driver capability
EP Specifications PDFLinear velocity transducer that incorporates a self-generating tachometer with voltage output that eliminates the need for any external power supply.
V Specifications PDFVP Series combines a self-generating tachometer and a percision potentiometer to give both velocity and analog position.
VP Specifications PDF